Close-up of finished application of the Premcote 1500™ Tape System
One of three rolling rigs in use for this project - used to apply Premcote 1500™ Tape
When applying the wrapping tape using a rolling rig, the contractors need to stop the tape wrapping at approx. 350mm from the spigot end of the pipe and typically 250mm from the socket end of the pipe to accommodate for the machine rollers
The Premcote 1500™ Tape System protected pipelengths are laid out prior to installation on-site
The 1,600mm pipes being prepared for backfill
The pipes ready for backfilling
The tie rods are primered before Premtape™ Tropical is applied, swiftly followed by the Premier™ PVC Self-Adhesive Tape
The finished system
The tie rods encased within plastic tubing when placed in-situ
The application of the Premseal GMA™ gasproofing membrane involved a lot of detailing on site.
Premseal GMA used to gasproof the floor of an apartment development in Kingston-upon-Thames
Prempaste™ is applied to the pipe
Premtape™ Tropical is wrapped spirally around the pipe
Prempaste™ is spread over the joint and the surrounding pipe
Prempaste™ is spread over the joint and the surrounding pipe
Premtape™ LD Mastic is applied to the joint
Premtape™ Tropical is wrapped around the joint
Premtape™ Tropical is wrapped around the joint
Premier™ PVC Self-Adhesive Tape is applied as the final layer of protection
Premier™ PVC Self-Adhesive Tape is applied as the final layer of protection
The concrete ring was repaired before product application
The finished application of the Steelcoat Tank Base Protection System
The Steelcoat Tank Base Protection System is applied to the tank base to offer outstanding corrosion prevention to the six tanks at the Green Asia Tank Storage Site
Workers on site beginning application of the Premtape™ Tropical System
Profiling with Premier™ Moulding Compound
Overwrapping the valve with Premtape™ Tropical after application of Premier™ Moulding Compound
The finished Premier system